International Association
for Cryptologic Research

Physical security is an important aspect of devices for which an adversary can manipulate the physical execution environment. Recently, more and more attention has been directed towards a security model that combines the capabilities of passive and active physical attacks, i.e., an adversary that performs fault-injection and side-channel analysis at the same time. Implementing countermeasures against such a powerful adversary is not only costly but also requires the skillful combination of masking and redundancy to counteract all reciprocal effects.In this work, we propose a new methodology to generate combined-secure circuits. We show how to transform Threshold Implementation (TI)-like constructions to resist any adversary with the capability to tamper with internal gates and probe internal wires. For the resulting protection scheme, we can prove the combined security in a well-established theoretical security model.Since the transformation preserves the advantages of TI-like structures, the resulting circuits prove to be more efficient in the number of required bits of randomness (up to 100%), the latency in clock cycles (up to 40%), and even the area for pipelined designs (up to 40%) than the state of the art for an adversary restricted to manipulating a single gate and probing a single wire.

In our highly digitalized world, an adversary is not constrained to purely digital attacks but can monitor or influence the physical execution environment of a target computing device. Such side-channel or fault-injection analysis poses a significant threat to otherwise secure cryptographic implementations. Hence, it is important to consider additional adversarial capabilities when analyzing the security of cryptographic implementations besides the default black-box model. For side-channel analysis, this is done by providing the adversary with knowledge of some internal values, while for fault-injection analysis the capabilities of the adversaries include manipulation of some internal values. In this work, we extend probabilistic security models for physical attacks, by introducing a general random probing model and a general random fault model to capture arbitrary leakage and fault distributions, as well as the combination of these models. Our aim is to enable a more accurate modeling of low-level physical effects. We then analyze important properties, such as the impact of adversarial knowledge on faults and compositions, and provide tool-based formal verification methods that allow the security assessment of design components. These methods are introduced as extension of previous tools VERICA and IronMask which are implemented, evaluated and compared.

With an increasing number of mobile devices and their high accessibility, protecting the implementation of cryptographic functions in the presence of physical adversaries has become more relevant than ever. Over the last decade, a lion’s share of research in this area has been dedicated to developing countermeasures at an algorithmic level. Here, masking has proven to be a promising approach due to the possibility of formally proving the implementation’s security solely based on its algorithmic description by elegantly modeling the circuit behavior. Theoretically verifying the security of masked circuits becomes more and more challenging with increasing circuit complexity. This motivated the introduction of security notions that enable masking of single gates while still guaranteeing the security when the masked gates are composed. Systematic approaches to generate these masked gates – commonly referred to as gadgets – were restricted to very simple gates like 2-input AND gates. Simply substituting such small gates by a secure gadget usually leads to a large overhead in terms of fresh randomness and additional latency (register stages) being introduced to the design.In this work, we address these problems by presenting a generic framework to construct trivially composable and secure hardware gadgets for arbitrary vectorial Boolean functions, enabling the transformation of much larger sub-circuits into gadgets. In particular, we present a design methodology to generate first-order secure masked gadgets which is well-suited for integration into existing Electronic Design Automation (EDA) tools for automated hardware masking as only the Boolean function expression is required. Furthermore, we practically verify our findings by conducting several case studies and show that our methodology outperforms various other masking schemes in terms of introduced latency or fresh randomness – especially for large circuits.

Masking has been recognized as a sound and secure countermeasure for cryptographic implementations, protecting against physical side-channel attacks. Even though many different masking schemes have been presented over time, design and implementation of protected cryptographic Integrated Circuits (ICs) remains a challenging task. More specifically, correct and efficient implementation usually requires manual interactions accompanied by longstanding experience in hardware design and physical security. To this end, design and implementation of masked hardware often proves to be an error-prone task for engineers and practitioners. As a result, our novel tool for automated generation of masked hardware (AGEMA) allows even inexperienced engineers and hardware designers to create secure and efficient masked cryptograhic circuits originating from an unprotected design. More precisely, exploiting the concepts of Probe-Isolating Non-Interference (PINI) for secure composition of masked circuits, our tool provides various processing techniques to transform an unprotected design into a secure one, eventually accelerating and safeguarding the process of masking cryptographic hardware. Ultimately, we evaluate our tool in several case studies, emphasizing different trade-offs for the transformation techniques with respect to common performance metrics, such as latency, area, andrandomness.

Accelerated by the increased interconnection of highly accessible devices, the demand for effective and efficient protection of hardware designs against Side-Channel Analysis (SCA) is ever rising, causing its topical relevance to remain immense in both, academia and industry. Among a wide range of proposed countermeasures against SCA, masking is a highly promising candidate due to its sound foundations and well-understood security requirements. In addition, formal adversary models have been introduced, aiming to accurately capture real-world attack scenarios while remaining sufficiently simple to efficiently reason about the SCA resilience of designs. Here, the d-probing model is the most prominent and well-studied adversary model. Its extension, introduced as the robust d-probing model, covers physical defaults occurring in hardware implementations, particularly focusing on combinational recombinations (glitches), memory recombinations (transitions), and routing recombinations (coupling).With increasing complexity of modern cryptographic designs and logic circuits, formal security verification becomes ever more cumbersome. This started to spark innovative research on automated verification frameworks. Unfortunately, these verification frameworks mostly focus on security verification of hardware circuits in the presence of glitches, but remain limited in identification and verification of transitional leakage. To this end, we extend SILVER, a recently proposed tool for formal security verification of masked logic circuits, to also detect and verify information leakage resulting from combinations of glitches and transitions. Based on extensive case studies, we further confirm the accuracy and practical relevance of our methodology when assessing and verifying information leakage in hardware implementations.

Physical characteristics of electronic devices, leaking secret and sensitive information to an adversary with physical access, pose a long-known threat to cryptographic hardware implementations. Among a variety of proposed countermeasures against such Side-Channel Analysis attacks, masking has emerged as a promising, but often costly, candidate. Furthermore, the manual realization of masked implementations has proven error-prone and often introduces flaws, possibly resulting in insecure circuits. In the context of automatic masking, a new line of research emerged, aiming to replace each physical gate with a secure gadget that fulfills well-defined properties, guaranteeing security when interconnected to a large circuit. Unfortunately, those gadgets introduce a significant amount of additional overhead into the design, in terms of area, latency, and randomness requirements.In this work, we present a novel approach to reduce the demands for randomness in such gadget-composed circuits by reusing randomness across gadgets while maintaining security in the probing adversary model. To this end, we embedded the corresponding optimization passes into an Electronic Design Automation toolchain, able to construct, optimize, and implement masked circuits, starting from an unprotected design. As such, our security-aware optimization offers an additional building block for existing or new Electronic Design Automation frameworks, where security is considered a first-class design constraint.

Physical attacks, including passive Side-Channel Analysis and active Fault Injection Analysis, are considered among the most powerful threats against physical cryptographic implementations. These attacks are well known and research provides many specialized countermeasures to protect cryptographic implementations against them. Still, only a limited number of combined countermeasures, i.e., countermeasures that protect implementations against multiple attacks simultaneously, were proposed in the past. Due to increasing complexity and reciprocal effects, design of efficient and reliable combined countermeasures requires longstanding expertise in hardware design and security. With the help of formal security specifications and adversary models, automated verification can streamline development cycles, increase quality, and facilitate development of robust cryptographic implementations.In this work, we revise and refine formal security notions for combined protection mechanisms and specifically embed them in the context of hardware implementations. Based on this, we present the first automated verification framework that can verify physical security properties of hardware circuits with respect to combined physical attacks. To this end, we conduct several case studies to demonstrate the capabilities and advantages of our framework, analyzing secure building blocks (gadgets), S-boxes build from Toffoli gates, and the ParTI scheme. For the first time, we reveal security flaws in analyzed structures due to reciprocal effects, highlighting the importance of continuously integrating security verification into modern design and development cycles.

Microarchitectural side-channel vulnerabilities in modern processors are known to be a powerful attack vector that can be utilized to bypass common security boundaries like memory isolation. As shown by recent variants of transient execution attacks related to Spectre and Meltdown, those side channels allow to leak data from the microarchitecture to the observable architectural state. The vast majority of attacks currently build on the cache-timing side channel, since it is easy to exploit and provides a reliable, fine-grained communication channel. Therefore, many proposals for side-channel secure cache architectures have been made. However, caches are not the only source of side-channel leakage in modern processors and mitigating the cache side channel will inevitably lead to attacks exploiting other side channels. In this work, we focus on defeating side-channel attacks based on page translations.It has been shown that the Translation Lookaside Buffer (TLB) can be exploited in a very similar fashion to caches. Since the main caches and the TLB share many features in their architectural design, the question arises whether existing countermeasures against cache-timing attacks can be used to secure the TLB. We analyze state-ofthe-art proposals for side-channel secure cache architectures and investigate their applicability to TLB side channels. We find that those cache countermeasures are notdirectly applicable to TLBs, and propose TLBcoat, a new side-channel secure TLB architecture. We provide evidence of TLB side-channel leakage on RISC-V-based Linux systems, and demonstrate that TLBcoat prevents this leakage. We implement TLBcoat using the gem5 simulator and evaluate its performance using the PARSEC benchmark suite.

Fault Injection Analysis is seen as a powerful attack against implementations of cryptographic algorithms. Over the last two decades, researchers proposed a plethora of countermeasures to secure such implementations. However, the design process and implementation are still error-prone, complex, and manual tasks which require long-standing experience in hardware design and physical security. Moreover, the validation of the claimed security is often only done by empirical testing in a very late stage of the design process. To prevent such empirical testing strategies, approaches based on formal verification are applied instead providing the designer early feedback.In this work, we present a fault verification framework to validate the security of countermeasures against fault-injection attacks designed for ICs. The verification framework works on netlist-level, parses the given digital circuit into a model based on Binary Decision Diagrams, and performs symbolic fault injections. This verification approach constitutes a novel strategy to evaluate protected hardware designs against fault injections offering new opportunities as performing full analyses under a given fault models.Eventually, we apply the proposed verification framework to real-world implementations of well-established countermeasures against fault-injection attacks. Here, we consider protected designs of the lightweight ciphers CRAFT and LED-64 as well as AES. Due to several optimization strategies, our tool is able to perform more than 90 million fault injections in a single-round CRAFT design and evaluate the security in under 50 min while the symbolic simulation approach considers all 2128 primary inputs.

During the past two decades there has been a great deal of research published on masked hardware implementations of AES and other cryptographic primitives. Unfortunately, many hardware masking techniques can lead to increased latency compared to unprotected circuits for algorithms such as AES, due to the high-degree of nonlinear functions in their designs. In this paper, we present a hardware masking technique which does not increase the latency for such algorithms. It is based on the LUT-based Masked Dual-Rail with Pre-charge Logic (LMDPL) technique presented at CHES 2014. First, we show 1-glitch extended strong noninterference of a nonlinear LMDPL gadget under the 1-glitch extended probing model. We then use this knowledge to design an AES implementation which computes a full AES-128 operation in 10 cycles and a full AES-256 operation in 14 cycles. We perform practical side-channel analysis of our implementation using the Test Vector Leakage Assessment (TVLA) methodology and analyze univariate as well as bivariate t-statistics to demonstrate its DPA resistance level.

We present the family of authenticated encryption schemes SKINNY-AEAD and the family of hashing schemes SKINNY-Hash. All of the schemes employ a member of the SKINNY family of tweakable block ciphers, which was presented at CRYPTO 2016, as the underlying primitive. In particular, for authenticated encryption, we show how to instantiate members of SKINNY in the Deoxys-I-like ΘCB3 framework to fulfill the submission requirements of the NIST lightweight cryptography standardization process. For hashing, we use SKINNY to build a function with larger internal state and employ it in a sponge construction. To highlight the extensive amount of third-party analysis that SKINNY obtained since its publication, we briefly survey the existing cryptanalysis results for SKINNY-128-256 and SKINNY-128-384 as of February 2020. In the last part of the paper, we provide a variety of ASIC implementations of our schemes and propose new simple SKINNY-AEAD and SKINNY-Hash variants with a reduced number of rounds while maintaining a very comfortable security margin. https://csrc.nist.gov/Projects/Lightweight-Cryptography

Implementing cryptographic functions securely in the presence of physical adversaries is still a challenge although a lion's share of research in the physical security domain has been put in development of countermeasures. Among several protection schemes, masking has absorbed the most attention of research in both academic and industrial communities, due to its theoretical foundation allowing to provide proofs or model the achieved security level. In return, masking schemes are difdicult to implement as the implementation process often is manual, complex, and error-prone. This motivated the need for formal verification tools that allow the designers and engineers to analyze and verify the designs before manufacturing. In this work, we present a new framework to analyze and verify masked implementations against various security notions using different security models as reference. In particular, our framework { which directly processes the resulting gate-level netlist of a hardware synthesis { particularly relies on Reduced Ordered Binary Decision Diagrams (ROBDDs) and the concept of statistical independence of probability distributions. Compared to existing tools, our framework captivates due to its simplicity, accuracy, and functionality while still having a reasonable efficiency for many applications and common use-cases.

Area minimization is one of the main efficiency criterion for lightweight encryption primitives. While reducing the implementation data path is a natural strategy for achieving this goal, Substitution-Permutation Network (SPN) ciphers are usually hard to implement in a bit-serial way (1-bit data path). More generally, this is hard for any data path smaller than its Sbox size, since many scan flip-flops would be required for storage, which are more area-expensive than regular flip-flops.In this article, we propose the first strategy to obtain extremely small bit-serial ASIC implementations of SPN primitives. Our technique, which we call bit-sliding, is generic and offers many new interesting implementation trade-offs. It manages to minimize the area by reducing the data path to a single bit, while avoiding the use of many scan flip-flops.Following this general architecture, we could obtain the first bit-serial and the smallest implementation of AES-128 to date (1560 GE for encryption only, and 1738 GE for encryption and decryption with IBM 130 nm standard-cell library), greatly improving over the smallest known implementations (about 30% decrease), making AES-128 competitive to many ciphers specifically designed for lightweight cryptography. To exhibit the generality of our strategy, we also applied it to the PRESENT and SKINNY block ciphers, again offering the smallest implementations of these ciphers thus far, reaching an area as low as 1065 GE for a 64-bit block 128-bit key cipher. It is also to be noted that our bit-sliding seems to obtain very good power consumption figures, which makes this implementation strategy a good candidate for passive RFID tags.